Skip to content
Wasaga BeachLock Services · Wasaga BeachOpen 24/7(249) 492-2389Request a visit
Detached horizontal exit device and separate strike component on a workshop bench. — Panic & Exit Hardware, Wasaga Beach

Commercial · Wasaga Beach

Panic & Exit Hardware

Two doors used to swing as a pair at the community hall entrance, but one leaf has started closing before the other, catching the astragal and leaving a gap wide enough to worry the caretaker.

Request a visit(249) 492-2389

Panic & Exit Hardware

In plain words

The visit ends with a record, not just a working door. Every device fitted is logged with its type, its rating, the force and latch checks it passed, and who now holds the dogging key. That record is what a fire inspector, an insurer or a new property manager asks for later, and it is far easier to hand over on the day of installation than to reconstruct afterward from memory of what went on which door.

Sound familiar?

A padlock went on the stockroom's back door years ago for security and nobody has thought about it since, until the walkthrough this week pointed out that the same door is the room's only other way out.

How the visit goes

Wasaga Beach

How the visit goes

  1. Confirming why the door needs this hardware

    The visit starts with the reason exit hardware is being discussed at all: an occupant load that has crossed a threshold, a fire inspector's note, a new use for the room, or an existing device that has stopped working the way it should. Confirming this first decides everything downstream, because a door required to have a releasing device is treated differently from one where an owner simply wants easier egress. Whoever is responsible for the building is asked directly what triggered the visit, and the answer is recorded alongside the door it concerns before any hardware is chosen.

  2. Recording what was fitted

    The visit closes with a written account of the work: which device went on which door, its type and rating, the outside trim fitted, any electrified function added, and the tests the assembly passed. This record travels with the building rather than staying in the locksmith's memory, so a fire inspector, an insurer or a new manager reviewing the space later has a clear account of the exit hardware and when it was fitted.

  3. A door that opens under one motion, every time

    What the space has afterward is straightforward: anyone inside can leave through that door with a single push on the crossbar or touchpad, no key, no second step, no need to remember which way a lock turns. Staff can be shown the motion once and it stays intuitive, because that is exactly what the hardware is built to do. Outside, entry still works the way it was set up to, through the trim chosen for that door, entirely separate from the exit function inside.

Panic & Exit Hardware

In the van

  • Outside trim (pull, lever or cylinder)
  • Request-to-exit switch
  • Signage and labels
  • Dogging key or keyed cylinder
  • Through-fixings and mounting hardware

What affects the quote

Same fees day, night or weekend

  1. 1Outside trim selected

    A plain pull is the simplest outside trim. A lever with a key cylinder, or a trim matched to other hardware finishes in the building, involves more parts and more fitting time.

  2. 2Number of openings involved

    One door with a single device is the simplest case. A building with several affected exits, such as doors from a stairway plus an assembly-room exit, is quoted as the sum of each opening's own work.

  3. 3Fire-rated versus non-rated opening

    A fire-rated door needs hardware specifically listed for that assembly and installed to keep the rating intact, which is more involved than fitting a standard device to a non-rated door.

What to have ready

0 of 3 ready

Call (249) 492-2389

Panic & Exit Hardware: questions

Do exterior exit doors need anything different from interior ones?

An exterior device faces weather an interior one does not: temperature swings, moisture and road salt tracked up to the door in winter. The device, strike and trim chosen for an exterior opening account for that exposure, and more frequent cleaning and light lubrication keeps an exterior crossbar releasing smoothly through a whole winter season.

When does a door actually need this hardware rather than a regular lock?

It comes down to occupancy and occupant load rather than preference. Rooms used for assembly, such as banquet halls, places of worship or gyms, and doors serving a stairway in a busier building, are where this hardware becomes the standard choice instead of a keyed lock on the exit side. A fire inspector or building official is the practical way to confirm whether a specific room has crossed that line.

Can I add a request-to-exit switch for my access-control system?

Yes. A request-to-exit switch is wired to signal the access-control panel that the pushpad or crossbar was actuated. Telling that apart from a forced or propped door usually means pairing it with a door-position contact and the panel's own logic, since the switch on its own only reports that the hardware was used. It sits alongside the mechanical device without changing how the crossbar or touchpad works, so the door still releases under a push even if the access-control system loses power.

Commercial Locks

Person holding a door-handle and latch assembly at a worktable outside a glass entrance, with additional handles and tools laid out. — Commercial Rekeying, Wasaga Beach
Commercial RekeyingA key turned up in the parking lot with the shop's name on its fob.

Panic & Exit Hardware near you

Whatever brought you to this page from Wasaga Beach, whether it was a lockout, a lost key, a move, a break-in or simply a door that has annoyed you for months, one of the services below fits. Each is written to tell you what happens, what it involves, and what you have when the locksmith leaves.

Open 24/7 · call(249) 492-2389Request a visit