Skip to content
Wasaga BeachLock Services · Brocks BeachOpen 24/7(249) 492-2389Request a visit
Close view of a satin-nickel deadbolt thumbturn and edge faceplate on a painted timber door. — Deadbolt Installation, Brocks Beach

Change or rekey · Brocks Beach

Deadbolt Installation in Brocks Beach

The front door has a handsome lever and a keyed knob, and that is all. Nothing above it.

Request a visit(249) 492-2389

Deadbolt Installation

In plain words

A deadbolt installation is also the moment to sort out keys. The new cylinder can be pinned to match the key you already use, so the household stays on one key, or set to a fresh key if you would rather retire whatever copies are in circulation. Many keypad and smart deadbolts fit the same standard bore as a mechanical one, so a door prepared today for a keyed bolt often accepts one later, though the exact model's bore and thickness still need checking. Either way you leave with keys that work in every door they are meant to, tested one by one.

Sound familiar?

The back door has a deadbolt in name only: a short bolt, a thin brass strike held by two little screws, and a jamb you can flex with your palm. It was fine for a builder's showing. It is not fine for a laneway.

How the visit goes

Brocks Beach

How the visit goes

  1. Where the bolt should sit on the door

    On a door with no deadbolt yet, its height is not fixed by the manufacturer but by the door in front of you. The usual spot is 140 to 150 mm above the centre of the knob, which places the bolt near the strongest part of the lock stile and keeps both locks within one comfortable reach. The locksmith checks that this height misses any glass, decorative panel, hinge line or the wood block inside an insulated door, and that the frame behind that spot is solid rather than a gap between shims. If a storm door or screen door shares the opening, the bolt's thumb-turn and cylinder have to clear it as well.

  2. Assembling the cylinder and thumb-turn

    The outside housing goes on first, with its tailpiece threaded through the slot in the bolt cam and its mounting posts through the matching holes. Any plastic alignment bracket that ships with the lock is used on a 54 mm bore and removed on a smaller one. The inside thumb-turn plate is set against the door and the two long tapered screws are driven through it into the outside housing, snug rather than crushed, so the housings pull tight to the door without distorting the mechanism. The locksmith turns the thumb-turn before the door is closed to confirm the bolt throws its full length and returns without a catch.

  3. Keys that open what they should

    You leave with the keys sorted, whichever way you chose. If the new cylinder was pinned to your existing key, every ring in the house still works and the new door has simply joined the set. If it was set to a fresh key, you have a small bundle of new keys, cut from the pins rather than copied from a worn original, and a clear idea of which old keys no longer matter. Count them, decide who carries one, and test each in the new bolt before the locksmith leaves. A spare kept with a trusted neighbour or in a small lockbox is worth arranging on the same afternoon.

Deadbolt Installation

In the van

  • Jamb reinforcer
  • 75 mm (3 in) strike screws
  • Manufacturer's bore template
  • Rekeying pins and key blanks
  • Boring jig and 54 mm hole saw

What affects the quote

Same fees day, night or weekend

  1. 1Strike and frame reinforcement

    A reinforced strike with long screws is standard; a full-length jamb reinforcer, a strike box or repairs to a split jamb after a forced entry are extra items quoted on their own.

  2. 2Non-standard bore or backset

    Older doors with a small cross bore, an unusual backset or a mortise lock case need adapting or filling before a modern deadbolt fits, and that preparation is quoted before work begins.

  3. 3Travel to the property

    Distance and access are part of any call-out: a house on a suburban street and a rural property down a long road involve different driving time, and the quote says so.

What to have ready

0 of 3 ready

Call (249) 492-2389

Deadbolt Installation: questions

Why does the strike plate matter so much?

The strike is the metal plate the bolt throws into, and it is where a kicked door usually fails: short screws bite only into the thin jamb board, which splits. A reinforced strike or strike box fastened with 75 mm screws passes through the jamb into the stud behind, so a blow is met by the framing of the house. On a wood frame, strike screws that reach at least 30 mm into solid wood behind the jamb are what actually holds.

Does a deadbolt work with a storm door or screen door?

It does, with one check: the thumb-turn and the outside cylinder have to clear the storm door when it closes. Most storm doors leave enough depth, but a low-profile deadbolt trim is chosen where the gap is tight. The storm door's own latch is separate and does not replace a bolt on the main door, since a screen frame gives little resistance on its own.

Can a keypad or smart deadbolt be fitted instead of a keyed one?

Yes, and the preparation is the same. Many electronic deadbolts use the standard 54 mm bore and the same edge bore, so a door cut for a mechanical bolt often accepts one, and a keyed bolt fitted today can usually be swapped for a keypad later, subject to that model's own bore, backset and thickness needs. The locksmith checks door thickness against the model, fits a reinforced strike as usual, sets up codes with you and shows where the backup cylinder or battery terminals are.

Change or Rekey Locks

Two detached brass lock cylinders and four house keys on a wooden counter. — Lock Rekeying, Brocks Beach
Lock RekeyingThe previous owners left a coffee tin of keys on the counter, some labelled, most not.

Deadbolt Installation near you

The services below cover most of what a door in Brocks Beach can throw at you. Some are urgent, like a lockout or a snapped key. Others are planned, like upgrading to a high-security cylinder or setting up a master key system for a small building. Each one is explained in plain terms so you know what to expect.

Open 24/7 · call(249) 492-2389Request a visit