Skip to content
Wasaga BeachLock Services · SunnysideOpen 24/7(249) 492-2389Request a visit
Detached satin-nickel lever hardware, tubular latch and strike plate on a wooden workbench. — Lock Replacement & Upgrade, Sunnyside

Change or rekey · Sunnyside

Lock Replacement & Upgrade in Sunnyside

The brass handleset has gone blotchy and green where the winter salt reaches it, and the coating on the deadbolt is lifting in flakes. It still locks, but it looks tired beside the fresh paint on the door.

Request a visit(249) 492-2389

Lock Replacement & Upgrade

In plain words

After a break-in or an attempt, the door tells a story, and the new hardware should answer it. Splintered wood around the strike means the jamb gave before the lock did, so the repair pairs a heavier deadbolt with a reinforced strike and 75 millimetre screws that reach the framing behind the jamb. A bent bolt or cracked housing is replaced with a graded deadbolt whose bolt has a hardened core. A knob lock that was bumped or forced is swapped for a set with better pins. The aim is a whole opening that resists force, not merely a shinier lock.

Sound familiar?

Someone tried the back door while you were away. The jamb is splintered around the strike, the bolt is bent, and the knob turns with a grinding feel. Everything held, barely, and you want hardware that would do better next time.

How the visit goes

Sunnyside

How the visit goes

  1. The key plan for the whole house

    A lock is only half of a system; the other half is who holds which key. The locksmith asks how many exterior doors there are, which ones should open with the same key, whether a garage man-door or a shed should join them, and who in the household needs a key of their own. If keys have been lent out over the years, the plan can retire all of them at once. Where copying keys without permission is a worry, a restricted keyway can be offered. Settling this before the hardware is chosen means the new locks arrive ready to be pinned alike rather than fixed up afterwards.

  2. Installing a keypad or smart deadbolt

    A smart lock is fitted like any deadbolt, then brought to life. The bolt and exterior keypad go on first, the interior module with its battery pack after, and the door is closed so the lock can learn where the bolt sits; a bolt that meets resistance in the strike is corrected before pairing, because a straining motor drains batteries and fails early. Codes are programmed for each person, auto-lock and sound settings are set to your liking, any phone or hub pairing is completed, and the mechanical override cylinder is tested with its key. Fresh batteries go in last.

  3. A clear plan for the remaining doors

    Most households do not replace every lock in one visit, and you leave with a short list of what is left, in order of importance. Typically the front door and the garage-to-house door come first, then the back and side doors, then the patio slider and interior sets. Because the key plan has been settled, any lock added later can be pinned to the same key, so the house stays on one key as the work continues. Finishes and styles are recorded so future hardware matches. The first visit sets the standard; the rest of the house can follow when it suits you.

Lock Replacement & Upgrade

In the van

  • 75 millimetre strike and hinge screws
  • Manufacturer-approved cylinder lubricant
  • Key blanks and key cutter
  • Adjustable latch or bolt
  • Filler plates and thick-door extension kits

What affects the quote

Same fees day, night or weekend

  1. 1Keys cut

    Each key is counted, and restricted keys cut against a card are a different item from standard blanks. Say how many people need one and the quote lists them.

  2. 2Smart lock setup

    Fitting a keypad or smart deadbolt includes programming codes, pairing to a phone or hub and calibrating the bolt, which is time on top of the mechanical installation and is named in the quote.

  3. 3Number of doors

    One back door is a small visit; the front, back, side, garage man-door and patio slider together are a longer one, though several doors done at once share the travel and setup.

What to have ready

0 of 3 ready

Call (249) 492-2389

Lock Replacement & Upgrade: questions

I have just bought a house. What should I do about the locks?

Assume that copies of the old keys exist somewhere and act on the day you take possession. Walk every exterior door with the locksmith, keep hardware that is sound and have it rekeyed to a new key, replace hardware that is worn or too light, and add a deadbolt to any door that lacks one. Ask for everything to be keyed alike so you leave with one key and a known number of copies.

Can I stop people copying my house key?

A restricted keyway helps with that. The key blanks are controlled by the manufacturer and its authorised locksmiths, so a copy generally requires the card, record or authorisation the program uses, cutting down on copies made at an ordinary kiosk. It suits homes where keys are lent to cleaners, contractors or tenants. The cylinders are fitted in the normal way, and you keep the key card safe because it is what future copies depend on.

Can you match the new lock to my other door hardware?

Yes. Manufacturers make deadbolts, handlesets, knobs and levers in matching finishes and styles, so a replacement deadbolt can sit above your existing handle without looking like an afterthought. Bring or photograph the hardware you want to match, including the interior side, and note whether it is a warm brass, a satin nickel, an oil-rubbed bronze or a matte black. Where an exact match is not made, the locksmith suggests the closest family.

Change or Rekey Locks

Two detached brass lock cylinders and four house keys on a wooden counter. — Lock Rekeying, Sunnyside
Lock RekeyingThe previous owners left a coffee tin of keys on the counter, some labelled, most not.

Lock Replacement & Upgrade near you

For a household in Sunnyside the common requests are a rekey after moving in, a lockout, a deadbolt that grinds, and a lock that finally needs replacing. For a business they are storefront hardware, staff key control and exit devices. Both lists, and a few less common jobs, are laid out here.

Open 24/7 · call(249) 492-2389Request a visit