Skip to content
Wasaga BeachLock Services · PenetanguisheneOpen 24/7(249) 492-2389Request a visit
Hands comparing detached lock cylinders beside loose keys on a workbench. — Broken Key Extraction, Penetanguishene

Lockouts · Penetanguishene

Broken Key Extraction in Penetanguishene

The padlock on the shed has been stiff all summer. Today the key twisted, cracked at the tip, and left the end buried deep in the keyway.

Request a visit(249) 492-2389

Broken Key Extraction

In plain words

Two facts shape the job before the locksmith arrives: whether the door is locked or unlocked, and whether any of the key is showing. A fragment that protrudes can often be gripped and drawn straight out. One flush or deep needs extractors worked in alongside it. If the plug turned before the key broke, it has to be eased back to its resting position first so the pins line up and release the blade. A locked door means the extraction is followed by opening the lock; an unlocked one means securing it is the priority. Either way the door ends up locking with a key that fits.

Sound familiar?

A roommate tried to help with tweezers, then by gluing the other half to it. The fragment is now further in than it started, there is dried glue around the keyway, and the front door still does not open.

How the visit goes

Penetanguishene

How the visit goes

  1. How the piece is sitting

    The first look is at the fragment itself, without touching it. Does any of the blade show above the cylinder face, or is it flush or deeper still? Is the plug sitting at its normal rest position, or did it stop partway round when the key gave way? A protruding piece in a resting plug is the simplest case. A fragment past the shear line in a rotated plug means the pins are holding it, and the plug has to be brought back before anything will slide. Reading this correctly decides which extractor comes out of the case and spares the keyway from needless probing.

  2. Taking the cylinder apart to free it

    Occasionally a piece is too deep, glued in, or wedged past the pins where no extractor can reach. On a serviceable, removable cylinder, the lock is serviced from behind: removed from the door or padlock (a rekeyable padlock is normally unlocked first), its cap or retaining clip taken off, and a plug follower used to push the plug out while the top pins and springs stay in place. With the plug in hand the fragment is tapped out from the rear, the pins inspected, and everything cleaned before reassembly. Where the cylinder is non-rekeyable, damaged or will not free this way, a replacement cylinder is the alternative, explained first.

  3. Habits that keep keys in one piece

    A few small changes stop most repeat breaks. Push the key fully home before turning, and turn from the bow with a level hand, never with pliers or from the tip. Keep the house key off box-cutting and ice-scraping duty; every bend fatigues the blade at its narrowest cut. Replace a key the moment it shows a kink, a crack line or rounded cuts, and cut the replacement from code or a crisp original. Keep the ring light. If the lock itself starts to stiffen, that is the cue to lubricate or call, because a stiff lock is the one that breaks keys.

Broken Key Extraction

In the van

  • Fine-jawed extractor pliers
  • Key gauge and decoder
  • Tension tool for resetting the plug
  • Replacement cylinder or deadbolt
  • Manufacturer-approved cylinder lubricant

What affects the quote

Same fees day, night or weekend

  1. 1Condition of the cylinder

    Worn pins, a loose cap, grit or corrosion found after the piece is out may call for a service, a rekey or a new cylinder, each explained and quoted separately.

  2. 2Removing the cylinder to free it

    A deep or bound fragment may need the cylinder taken off the door and the plug pushed out from behind on the bench. That disassembly and reassembly is quoted on its own.

  3. 3Number of keys cut

    Copies are counted individually. One replacement for a single occupant and four for a household are different lines, and you choose the number on the spot.

What to have ready

0 of 3 ready

Call (249) 492-2389

Broken Key Extraction: questions

Why do keys break more in winter?

A daytime thaw sends meltwater into the keyway, and overnight it freezes with the plug held solid. The key goes in, meets resistance, and the natural reaction is to turn harder. Brass gives before ice does, especially at a deep cut that has thinned over years. Cold also stiffens old grease in the cylinder. De-icer, gentle warmth and a dry lubricant break the pattern.

What information helps when I call?

What the key was in: a front door deadbolt, a knob, a padlock, the driver's door or the ignition. Whether any of the key shows above the face. Whether the key turned before it broke and whether the door is locked now. Whether anything has been inserted since. Whether you have the other half, a spare or the key code. And whether the property is owned, rented or managed.

What proof do I need to show?

Photo identification and something that connects you to the lock. For a house or apartment that is a lease, a bill, addressed post, or confirmation from the property manager; for a business, your role there; for a vehicle, the registration or ownership papers with matching identification. If the documents are inside, say so on the phone and the check is completed once the door is open.

Lockout Services

Person holding a key beside a brass-colored deadbolt on an open painted door while another person watches from inside. — Home Lockout Service, Penetanguishene
Home Lockout ServiceSomeone pushed the privacy button on the bathroom door and pulled it shut behind them, leaving the room locked and empty.

Broken Key Extraction near you

Residents and business owners in Penetanguishene can use this list to find the service that fits, then read what it involves before anyone comes out. Emergency openings are here. So are rekeys, lock changes, deadbolt and high-security upgrades, commercial door hardware, master keys, safes and key cutting.

Open 24/7 · call(249) 492-2389Request a visit