
Locksmith in Stayner, OntarioSticking lock?Worn key? Sorted.
A key that needs jiggling, a bolt that only throws when you lift the handle, a cylinder that spins loose in the door. These are small annoyances in Stayner homes that become lockouts if ignored. We tune, rebuild or swap the part at fault and leave the door working like it did when it was new. Nearby, we also work in Sunnidale and Sunnidale Corners.
Nearby
- Wasaga Beach
- Clearview
- Midland
- Penetanguishene
- Creemore
- Brocks Beach
- New Wasaga Beach
- Oakview Beach
- Oxbow Park
- Firth's Corners
- Portage Park
- Sunnyside
- Dunedin
- Glen Huron
- Singhampton
- Balm Beach
- Coutnac Beach
- Edmore Beach
- Georgian Heights
- Kettle's Beach
- Marygrove
- Ossossane Beach
- Perkinsfield
- Sawlog Bay
- Wahnekewaning Beach
- Woodland Beach

Stayner
Ask about rekeying your Stayner business
For businesses in Stayner we keep records. Which cylinders were pinned to which key, how many keys were cut, which doors carry a master, when the closers were last adjusted. That paperwork lands in your inbox after the visit so the next staff change or the next audit is a matter of reading a page rather than calling around.
— Wasaga Beach Lock Services
- A locksmith who listensThe job starts with your description, not our assumptions. What you have noticed about the door often points to the cause before we touch it.
- Honest about what is worth doingSome hardware deserves saving and some does not. We tell you which and why, so you spend on what makes a difference.
- Left better than foundThe door works, the area is clean and you have keys, notes and a clear idea of what to watch for. That is the standard for every visit.
Hours
- HoursOpen 24/7
- Nights and weekendsSame fees
- In business16 years
- VisitsOn-site assessment
Locksmith services
What we can sort out
A locksmith's week in Stayner is a mix of small fixes and bigger decisions. A cylinder rekeyed after a lost key, a deadbolt added to a door that never had one, a shop rekeyed after staff changes, a safe that finally opens. The pages below describe each service and how the visit usually goes.
Stayner
Locksmith · Stayner
Business Lockout ServiceA cook stepped into the alley with the recycling and the rear door swung shut behind him.
Break-In Damage Lock RepairThe shop's aluminum door has a bent meeting stile and the hookbolt is jammed half out.
Deadbolt InstallationThe front door has a handsome lever and a keyed knob, and that is all.
Mailbox Lock ReplacementThe property manager mentioned that half the compartments in the lobby's mailbox panel are original to the building and are…
Safe Installation & ServicingA dinner service ends with a stack of bills and a handful of credit slips, and right now they sit in an unlocked cash box on a…
Panic & Exit HardwareTwo doors used to swing as a pair at the community hall entrance, but one leaf has started closing before the other, catching the…
Commercial-Grade Lock ReplacementHead office wants every branch keyed alike under one system, and half the locations are still running whatever lockset the…
Key Fob ProgrammingA cracked case or a spin through the wash left the fob unresponsive, and opening it up reveals a slightly corroded board where…
Transponder Key ProgrammingThe blade snapped off flush with the door lock last winter, and the shop that cut a replacement only matched the metal shape.
Lockouts
Lockout Services
Getting in is only half of an emergency visit. Once the door is open we look at why it locked you out: a worn key, a failing cylinder, a latch that catches.
Change or rekey
Change or Rekey Locks
Residential services are for the everyday building you live in, whether owned or rented. They range from cutting a spare and fixing a stiff cylinder to replacing every lock after a move, and we will always suggest the smaller job where it does what you need.
Simcoe, Ontario
Stayner information
- Town
- Stayner, Simcoe, Ontario
- In business
- 16 years
- Hours
- Open 24/7, same fees any hour
- Phone
- (249) 492-2389
- Visits
- On-site assessment preferred
Nearby
- Wasaga Beach
- Clearview
- Midland
- Penetanguishene
- Creemore
- Brocks Beach
- New Wasaga Beach
- Oakview Beach
- Oxbow Park
- Firth's Corners
- Portage Park
- Sunnyside
- Dunedin
- Glen Huron
- Singhampton
- Balm Beach
- Coutnac Beach
- Edmore Beach
- Georgian Heights
- Kettle's Beach
- Marygrove
- Ossossane Beach
- Perkinsfield
- Sawlog Bay
- Wahnekewaning Beach
- Woodland Beach
2021 census · what it means at the door
51%Older homes
About 51% of homes in Clearview were built in 1980 or earlier, according to the 2021 Census.
Older homes tend to have had many hands on their doors: owners, tenants, tradespeople, family. A locksmith visiting such a house pays attention to who holds keys now, and rekeying or a keyed-alike set often matters more than any new hardware.
90%Mostly houses
Single-detached houses make up about 90% of homes in Clearview (2021 Census).
Families in houses hand keys to children, cleaners, dog walkers and neighbours. A locksmith can set up a keypad on the side door for the household and keep the front door on a conventional key, so access matches how the family actually comes and goes.
Which fix fits?
A cook stepped into the alley with the recycling and the rear door swung shut behind him.The usual fix
UsuallyBusiness Lockout Service
WhyCommercial doors carry hardware that most homes never see, and reading it correctly is the first skill of a business lockout.
The patio slider is sitting crooked on its track.The usual fix
UsuallyBreak-In Damage Lock Repair
WhyBreak-in damage lock repair is the visit that turns a forced door back into a locked one.
You bought a keypad deadbolt online and pulled the old one off, only to find the hole in the door is a different size and the bolt latch sits at a backset the…The usual fix
UsuallyDeadbolt Installation
WhyMost of the value in a deadbolt is on the frame side, which is why a good installation spends as much time on the jamb as on the door.
The property manager mentioned that half the compartments in the lobby's mailbox panel are original to the building and are starting to fail one by one, key by…The usual fix
UsuallyMailbox Lock Replacement
WhySmall outdoor cam locks take a beating over a Canadian winter: road spray, salt, and repeated freezing leave the keyway gritty and the cylinder stiff long before the metal actually fails.
Things people wonder about
What is a restricted keyway and is it worth having for a business?
A restricted or patented keyway is one whose blanks are supplied only through the manufacturer's authorised channels, so duplication is controlled rather than available at an ordinary counter, though the exact authorisation step varies by program and is not always a signed letter. For a company with staff turnover, cleaners and contractors, it means the keys in circulation are far easier to track. It can be introduced during a rekey, on the exterior doors only or across the whole premises, and works alongside a key register.
The intruder pried open our sliding patio door. Can it be made secure?
Yes. The panel goes back on its track and the broken latch is replaced, then the weaknesses a slider is born with are addressed: anti-lift blocks in the upper channel so the panel cannot be raised off its rollers, a foot bolt or pin lock through the frame at the bottom, and an auxiliary keyed lock if the latch alone is flimsy. A bowed frame may need a door installer, with the opening secured until they come.
Does a deadbolt work with a storm door or screen door?
It does, with one check: the thumb-turn and the outside cylinder have to clear the storm door when it closes. Most storm doors leave enough depth, but a low-profile deadbolt trim is chosen where the gap is tight. The storm door's own latch is separate and does not replace a bolt on the main door, since a screen frame gives little resistance on its own.
How do I know what brand or type of lock is on my mailbox?
You generally do not need to; identifying the hardware is part of the visit. The locksmith reads the maker's mark on the lock face, measures the cylinder and cam, and checks the hole pattern in the compartment door, which together point to a matching replacement even when the original brand is no longer sold.
What is involved in servicing an older safe instead of replacing it?
Servicing works through the same checks as a new installation in reverse: the bolt-work is opened, cleaned, and lubricated, the lock is tested and adjusted if it binds, the anchoring underneath is confirmed or added if it was never done, and batteries are replaced if the lock is electronic. Many older safes have solid steel bodies that outlast the mechanism inside them, which makes servicing a practical route rather than starting over.
On-site assessment preferred
Request a visit
Let's fix that lock. Start with a phone call.








